Відео

Heck, I wish Milwaukee was the "fancy" version of Ryobi. Nope! Parent company TTI has done an excellent job with their power-tool brands, in terms of power, performance; for the money. I despise admitting that, but they have. You've got HART. Slightly better than entry-level brand. Wal-Mart exclusive. Positioned just above Wal-Mart's Hyper Tough brand. But H.T. isn't part of TTI. HART is mostly slightly better than cheap plastic construction. But not by much. Battery packs so cheap that sometimes when you buy the drill, the included battery won't charge up at all. (Lots of HART drill returns for that very reason.) Motors are pretty cheap too. Designed to last a handful of years if put through occasional use. But very cheap. Also very under-powered. Then you have Ryobi. For the DIYer who actually enjoys tackling home improvement projects. Massive selection of tools, at reasonable prices. But a lot of their models outside of their One+ HP line are just under-powered. More care involved in selection and construction of the innards. Though not to a huge degree. Still kept to a price-point. RIDGID.... Cult-like following. Significantly more expensive than Ryobi. But better in every way, shape, and form. Including quality of the motors and components used. However, no where near the value of Ryobi. You pay almost Pro-grade prices for tools that are still below Pro-grade. Stuck in an odd middle ground of not being as good as Milwaukee, but at nearly similar prices; which makes RIDGID not nearly as good of a value as Ryobi. But if you really love orange. Here's your brand. Since Kobalt realistically competes with Ryobi, RIDGID ends up being slightly better. Milwaukee: No expense spared for this brand by parent company TTI. The Golden Child out of its lesser siblings. RIDGID comes close, but always falls a bit short. The best, Top of The Line motors and components; all set aside for TTI's red brand. Care, attention to detail, only the best for Milwaukee tools. Made for the Pros, with machining price-tags to boot. The most impressive power, torque, components designed to last years with daily hard use! Ryobi? That's for the home owners and DIY enthusiasts who either don't have or refuse to pay Milwaukee Money for significantly better tools.

Thing looks clean. Definitely wont be seeing those around. Might be some in the junkyard tho. My boy bought a 2012 jeep patriot they're known for, like an ac leaking and rottin the subframe.

Thanks Bert.

Chrysler was notorious for using plastic calipers, pistons, and brake pads. Caused me major problems back in ‘84. The problem was the master cylinder after all the brake components had melted.

Now invest that into a nice battery powered cultivator 🧏🏼😁✌🏻

That was Mid Century Furniture - Brilliant Looking and a Nice Payday for You Bert - well done !!!!

Hey Bert saved another one how's those blackberries doing 😅

Atta-boy Bert! Show’em how it’s done! 😎✌🏼

Good deal all around.

nice pieces

Four bills? ^5!

Awesome sale @Burt !! I’ve got 2 pieces from the 30’s.. both armoire’s.. Just beautiful pieces. But no one wants to pay even CLOSE to what they’re worth around here. It’s a specific niche for the specific buyer. I dang sure aren’t giving them away. lol Stay blessed brother have a great week!!

$400.00 Bucks ! 😮 Well done ! 💰🤗

Hey Bert was that from your last locker 😅

Good for you.👀👍💪

Shit Bert, I've gotva 96 chevy 1500 that tows a 18ft landscape trailer daily with 289k on it,just has a little chevy front end wondering.I also have a 99 F250 with 280k on it and a 99 chevy 3500 with 113k on it.i personally will not buy a new(er) truck for $80-100 that's just flat out insanity..I've not commented in a while but still watch you daily.Good Luck with the jeep.

The only Chrysler car I ever owned was my daughter's PT Loser. Lasted 90,000 and engine locked up. Sold it to local scrap yard. That cheap Jeep ready for scrap at 10 years old. I am still driving my 83 Olds everyday...

#happyscrapping

I will take a tray of Blue Berries but I think the shipping would kill me. Good luck on the cooling system, it sounds like it's going to be a headache for you. By the way the shipping to NC is what would kill me.

Beautiful, Blueberris. Mechanical Adventures with Bert, fun and interesting ❤

the worth of that jeep is how much it weights

Whatever happened to the good old fashioned thermostatic switch to control the fan?.

That is a rivet n a half! Another great educational video

Hi Bert. You want the probe in the bottom of the radiator. Only when the bottom gets to hot you need the fan.

🦆

My sister had a 2009. Two transmission's later, she traded that POS in haha

Brilliant Job Bert - Your Knowledge & Know How is Fantastic ! Yum-Yum Blueberries ! Many Cheers from Australia !!!!

This was disappointing 😟 I thought you had a new addition to the fleet. Mmmmmmmmmmm Blueberries !

Still looking great. For me. I don't about engines, but the body and inside of it, looks taken care of well.

Rock Auto 36.79 in stock LOL

Great job Bert 😊

Those are nice vehicles, I have a 2004 jeep Cherokee its a good one to

Just wait until they figure out how to make plastic engine blocks and frames. They won't rust at least.

I got a 1996 jeep it's run good

Nice work 👍 it’s sad but true about a disposable society. 😢 Blueberries look delicious! 😎✌🏼

Nice work. Looks to be in pretty good shape. How much did you pay for it? Blueberries look delicious.

We never had a bit of luck with Jeeps over the years.

Hi Bert and everyone from northwest Missouri I drive a 1995 GMC z71 extended cab with almost 250 thousand miles on original motor and transmission frame has no rust cab and front fenders starting to rust 😢

Your little spa er slash censor remover looks like a left handed mini hockey stick coool Bert I gots some of those yeeeeeew

Well Bert, ya got yourself another iron to stick in the fire!😅 God bless you and your Family!

Put a toggle switch to turn the cooling system on and off

It's because of being a Chrysler product.....I had a American motors jeep ch5 and a j10 pickup in 1978 both new....which wasn't bad vehicles but the real beast was the original Willy's jeep

Hope that fix takes. Berries lookin great

I drive a 2005 Nissan, but it has 91000 miles on it, not over 200,000. Good luck messing with that beast!

I get it !😉 you're fixing it for someone else ! 🤷 Otherwise for 5 to 7 dollars you can get a light up toggle switch and mount it on the dash ! 🤗✨️

Couldn't you just put a toggle switch on it? Turn on when driving, off when your not? We live in a "disposable society " today, nothing is build to last or any quality.

Nice one. 🤟❤️

Reentry burn lol

My favorite vehicle I've owned was a old school Cherokee. Had it nearly 20 years. Ran like a top but always had heating and cooling issues. Eventually it was literally falling apart. My husband is ok with some repairs but it needed a lot of major surgery. Sold it to someone like you that might fix it up.

Boy people are being awfully rough on this car first of all it's 12 years old which is 2 years longer than the average car lasts and it's got 207,000 mi on it which is 107,000 mi more than the average car lasts and all it's got is a cooling fan problem? Well that's an easy fix and he's fixing it put a damn switch on it :-) And also don't forget about where he lives I used to live there I visited his farm he lives in the tri-state area in New Jersey salt and snow every winter any car more than 10 years old is impressive I mean look at how much welding he has to do to his cars That's not because the car is a bad that's because of where he lives :-) that area of the country is absolutely brutal on cars.